>> AV90
Example of versions
Sturdy, vertically sliding window for wide openings. Suitable for both indoor and outdoor installation. The sliding window has a 90* mm aluminium frame and can be equipped with insulating glass or up to 20 mm thick safety glass. The AV90 model can be produced with two, three or more moving sections, so that the largest possible part of the opening can be put to use.
In its standard version, the sliding window is satin anodized and is equipped with D4-12 double glazing. The frame can be finished by painting, powder coating or other forms of anodizing. The sliding window is equipped with a safety latch which prevents the window from dropping in the event of an accident.
The sliding window is automatically locked in closed position. Operated by control switch with hold to run buttons.
Example of versions
With one sliding section
With two sliding sections
Fixed glass
One sliding section and fixed aluminium section below
Two sliding sections and fixed light on each side
Two sliding sections and fixed light to the right
>> TECHNICAL SPECIFICATION
Width
Customers choice*
Height
Customers choice*
*Max / Min size (W x H) depends on specification (2-pane or 3-pane), the glass weight and the ratio between width and height.
Available models for smaller sizes is AV70, for larger sizes AV115.
Frame thickness
90 mm with one sliding section and 120 mm with two sliding sections.
Width of side posts
60 mm
Height of top profile
70 mm
Bottom profile
No
Width/Height of glass frames
30 mm
Construction
Motor, transmission, anti-fall device and automatic locking are integrated within the frame.
Locking
Mechanical lock which automatically locks the window in closed position.
Option: Key locking.
Power supply
230V AC transformer.
Option: Battery backup.
Control system
S3 control system with soft start/stop and hold-to-run buttons as standard. Adjustable speed, one-touch buttons, alarm closing and various control switches are available as options.
Glass
D4-12 double glazing is standard. Other glass up to 20 mm thick is available as an option, such as 14 mm thick class P6B impact-resistant laminated glass.
Finish
Satin anodized aluminium is standard. Other surface finishes available as an option include powder coating or stainless steel cladding.
Manufactured by
Svalson AB, Sweden.
CE marked
According to the Machine directive and EMC directive.
Design and material are subject to change without prior notice.