Example of versions
Sturdy, vertically sliding window for wide openings. Suitable for both indoor and outdoor installation. The sliding window has a 90* mm aluminium frame and can be equipped with insulating glass or up to 20 mm thick safety glass. The AV90 model can be produced with two, three or more moving sections, so that the largest possible part of the opening can be put to use.
In its standard version, the sliding window is satin anodized and is equipped with D4-12 double glazing. The frame can be finished by painting, powder coating or other forms of anodizing. The sliding window is equipped with a safety latch which prevents the window from dropping in the event of an accident.
The sliding window is automatically locked in closed position. Operated by control switch with hold to run buttons.
Example of versions
With one sliding section
With two sliding sections
One sliding section and fixed aluminium section below
Two sliding sections and fixed light on each side
Two sliding sections and fixed light to the right
>> TECHNICAL SPECIFICATION
*Max / Min size (W x H) depends on specification (2-pane or 3-pane), the glass weight and the ratio between width and height.
Available models for smaller sizes is AV70, for larger sizes AV115.
90 mm with one sliding section and 120 mm with two sliding sections.
Width of side posts
Height of top profile
Width/Height of glass frames
Motor, transmission, anti-fall device and automatic locking are integrated within the frame.
Mechanical lock which automatically locks the window in closed position.
Option: Key locking.
230V AC transformer.
Option: Battery back up.
S3 control system with hold to run buttons. Soft start/stop, adjustable speed, optional push-and-release buttons, optional alarm closing, etc and various control switches.
D4-12 double glazing is standard. Other glass up to 20 mm thick is available as an option, such as 14 mm thick class P6B impact-resistant laminated glass.
Satin anodized aluminium is standard. Other surface finishes available as an option include powder coating or stainless steel cladding.
Svalson AB, Sweden.
According to the Machine directive and EMC directive.
Design and material are subject to change without prior notice.